* use sys_enter tracepoint for sucompat
* update sucompat rules
* clean tif mark
* mark tif after load allow list
* clear all tif first, then mark target
* Fix shell su
* allow when escape
* fix bugs
* kernel: Resolve logical inconsistencies
---------
Co-authored-by: Ylarod <me@ylarod.cn>
Co-authored-by: weishu <twsxtd@gmail.com>
* refactor: replace throne tracker with ksud token
* use snprintf
* refactor: new supercall impl
- Import the sukisu command
* disable seccomp for supercall users
* kernel: fmt clear
* kernel: Enable macro protection for sulog
- Only enabled on kernel versions greater than 5.10.245
* kernel: Refactor kprobe hooks and implement LSM hooks for improved security handling
* debug mode
* kernel: Add functionality to generate and validate authentication tokens for cmd_su
* kernel: Simplified manual SU command processing for code
* kernel: replace renameat hook with fsnotify
* Revert "refactor: replace throne tracker with ksud token"
This reverts commit aa2cbbf9cd.
* kernel: fix compile
* kernel: fix compile below 6.0
* Fix compile err; Add become_manager
* kernel: install fd for manager automaticlly
- extend to import the corresponding command
* manager: new supercall impl
* temp changes for ksud
* ksud: fix compile
* fix wrong opcode
* kernel: fix compile
* kernel: Fixed hook type and KPM status retrieval errors
* kernel: Fixed potential null pointer issue with current->mm in kernel version 5.10
When calling get_full_comm() within system call hooks, current->mm may be null (prctl). A fallback mechanism for current->comm must be added beforehand to prevent null pointer dereferences when accessing mm->arg_start/arg_end.
Signed-off-by: ShirkNeko <109797057+ShirkNeko@users.noreply.github.com>
* ksud: fix cargo check
* manager: Fixed an issue where the KSUD release and user-mode scanning switch failed to function correctly.
- kernel: fix spin lock mutual
kernel: Fixed potential null pointer issue with current->mm in kernel version 5.10
When calling get_full_comm() within system call hooks, current->mm may be null (prctl). A fallback mechanism for current->comm must be added beforehand to prevent null pointer dereferences when accessing mm->arg_start/arg_end.
kernel: try introduce like susfs's method to fix prctl delay
* seccomp: allow reboot
* use u32
* update clang-format
* 4 spaces save the world
* ksud: Fix build on macOS
* manager: bump minimal supported kernel.
- When get_hook_type is empty, display “Unknown”.
* Fix ksud build (#2841)
* try fix ksud
* fix for macos
* remove any
* Fix ksud build, take 3
* try fix allowlist
* bring lsm hook back
* fix: a lot again
* Fix ksud build, take 4 (#2846)
Remove init_driver_fd function for non-linux/android targets
* manager: Return to the native method via KSUd installation
* Merge with susfs-mian format
---------
Signed-off-by: ShirkNeko <109797057+ShirkNeko@users.noreply.github.com>
Co-authored-by: Ylarod <me@ylarod.cn>
Co-authored-by: weishu <twsxtd@gmail.com>
Co-authored-by: AlexLiuDev233 <wzylin11@outlook.com>
Co-authored-by: Wang Han <416810799@qq.com>
* Due to numerous changes on LSM (Linux Security Module) in Linux 6.8+
* This is temporary guard until a working solution exist.
Signed-off-by: rsuntk <rsuntk@yukiprjkt.my.id>
detection is done by comparing a 0xDEADBEEF call to a non-0xDEADBEEF one.
which yeah, you will see that the non-0xDEADBEEF one returns early.
yes I know this causes delays for all prctl calls, as we straight up check uid,
but this keeps the delay consistent, which is what we want.
another is that we only should only perform this recrowning logic for multiuser
- temp fix for cimb octo's prctl abuse
Co-authored-by: backslashxx <118538522+backslashxx@users.noreply.github.com>
This migrates ksud execution decision-making to bprm_check_security.
This requires passing proper argv and envp to a modified _ksud handler
aptly named 'ksu_handle_bprm_ksud'.
Introduces:
int ksu_handle_bprm_ksud(const char *filename, const char *argv1,
const char *envp, size_t envp_len)
which is adapted from:
int ksu_handle_execveat_ksud(int *fd, struct filename **filename_ptr,
struct user_arg_ptr *argv,
struct user_arg_ptr *envp,
int *flags)
ksu_handle_bprm_ksud handles all the decision making, it decides when it is
time to apply_kernelsu_rules depending if it sees "second_stage".
For LSM hook, turns out we can pull out argv and envp from mm_struct.
The code in here explains itself on how to do it.
whole blob exists on arg_start to arg_end, so we just pull it out and grab next
array after the first null terminator.
as for envp, we pass the pointer then hunt for it when needed
My reasoning on adding a fallback on usercopy is that on some devices a fault
happens, and it copies garbled data. On my creation of this, I actually had to lock
that _nofault copy on a spinlock as a way to mimic preempt_disable/enable without
actually doing it. As per user reports, no failed _nofault copies anyway but we
have-to-have a fallback for resilience.
References:
- old version1 6efcd8193e
- old version2 37d5938e66
- bad usercopy #21
This now provides a small helper function, ksu_copy_from_user_retry, which explains
itself. First we attempt a _nofault copy, if that fails, we try plain.
With that, It also provides an inlined copy_from_user_nofault for < 5.8.
While using strncpy_from_user_nofault was considered, this wont do, this will
only copy up to the first \0.
devlog:
16e5dce9e7...16c1f5f52128642e60d7...728de0c571
References:
https://elixir.bootlin.com/linux/v4.14.1/source/include/linux/mm_types.h#L429https://elixir.bootlin.com/linux/v4.14.1/source/include/linux/lsm_hooks.h
Stale: https://github.com/tiann/KernelSU/pull/2653
Signed-off-by: backslashxx <118538522+backslashxx@users.noreply.github.com>
- Introduced a new module `uid_scanner` in userspace for managing UID scanning.
- Created a new GitHub Actions workflow for building the `user_scanner`.
- Implemented kernel communication in `throne_comm.c` and `throne_comm.h` to handle user space updates and rescan requests.
- Developed the `uid_scanner` daemon in C to scan user directories and manage UID whitelists.
- Added configuration management for the UID scanner with support for multiple users and auto-scanning.
- Implemented logging and error handling throughout the UID scanning process.
- Created necessary build files for the `user_scanner` JNI integration.
- Added a `.gitignore` file to exclude build artifacts.
Prioritize retrieving the application UID from /data/user_de. If this fails, fall back to retrieving it from packages.list.
Fix unstable application UID acquisition
Signed-off-by: ShirkNeko <109797057+ShirkNeko@users.noreply.github.com>
Use huawei_hisi_check.h to determine whether it is an old Huawei
HiSilicon device.
Solve:
1. Compatible with non-GKI Huawei HiSilicon devices
2. Solve different bugs in EMUI of different system versions
3. Does not affect other devices
Basic support for the case that init_task.mnt_ns != zygote.mnt_ns(WSA),
just copy nsproxy and fs pointers for solve #276.
Note the copy in `apk_sign.c` is not required but suggested for
secure(ensure the checked mnt_ns is what ns android running, not created
by user, although many distributions does not have user ns.).
Tested with latest release on Win10 19045.3086(with WSAPatch).
Further review required for:
- [x] Security of this operation (without locking).
- [x] The impact of these modifications on other Android distributions.
Hi @tiann.
Thanks for the great project, I had great fun playing around with it.
This PR mainly tries to further minimize the possible delays caused by
KernelSU hooking.
There are 3 major changes:
- Processes with 0 < UID < 2000 are blocked straight-up before going
through the allow_list.
I don't see any need for such processes to be interested in root, and
this allows returning early before going through a more expensive
lookup.
If there's an expected breakage due to this change, I'll remove it. Let
me know.
- A page-sized (4K) bitmap is added.
This allows O(1) lookup for UID <= 32767.
This speeds up `ksu_is_allow_uid()` by about 4.8x by sacrificing a 4K
memory. IMHO, a good trade-off.
Most notably, this reduces the 99.999% result previously from worrying
milliseconds scale to microseconds scale.
For UID > 32767, another page-sized (4K) sequential array is used to
cache allow_list.
Compared to the previous PR #557, this new approach gives another nice
25% performance boost in average, 63-96% boost in worst cases.
Benchmark results are available at
https://docs.google.com/spreadsheets/d/1w_tO1zRLPNMFRer49pL1TQfL6ndEhilRrDU1XFIcWXY/edit?usp=sharing
Thanks!
---------
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
On older kernel, kworker missing keyring from init process , and this
keyring is related to FBE , which causes filp_open return ENOKEY or
other errors.To fix this,just install init's keyring to per
kworkers.This works on Kernel 4.4 and 4.9.
