Step 7: Add susfs interface
This commit is contained in:
ShirkNeko
@@ -357,4 +357,251 @@
|
||||
<!-- Zip Install Prompts -->
|
||||
<string name="kernel_install_prompt_with_name">将安装以下内核：%1$s</string>
|
||||
<string name="mixed_install_prompt_with_name">将安装以下文件：%1$s</string>
|
||||
<!-- SuSFS Configuration -->
|
||||
<string name="susfs_config_title">SuSFS 配置</string>
|
||||
<string name="susfs_config_summary">配置SuSFS模块设置</string>
|
||||
<string name="susfs_config_description">配置说明</string>
|
||||
<string name="susfs_config_description_text">此功能允许您自定义 SuSFS 的 uname 值和构建时间伪装。输入您想要设置的值，点击应用即可生效</string>
|
||||
<string name="susfs_uname_label">Uname 值</string>
|
||||
<string name="susfs_uname_placeholder">请输入自定义 uname 值</string>
|
||||
<string name="susfs_build_time_label">构建时间伪装</string>
|
||||
<string name="susfs_build_time_placeholder">请输入构建时间伪装值</string>
|
||||
<string name="susfs_current_value">当前值: %s</string>
|
||||
<string name="susfs_current_build_time">当前构建时间: %s</string>
|
||||
<string name="susfs_reset_to_default">重置为默认值</string>
|
||||
<string name="susfs_apply">应用</string>
|
||||
<!-- SuSFS Reset Confirmation -->
|
||||
<string name="susfs_reset_confirm_title">确认重置</string>
|
||||
<!-- SuSFS Toast Messages -->
|
||||
<string name="susfs_binary_not_found">无法找到 ksu_susfs 文件</string>
|
||||
<string name="susfs_command_failed">SuSFS 命令执行失败</string>
|
||||
<string name="susfs_command_error">执行 SuSFS 命令时出错: %s</string>
|
||||
<string name="susfs_uname_set_success" formatted="false">SuSFS 内核名称和构建时间设置成功: %s, %s</string>
|
||||
<!-- SuSFS Settings Item -->
|
||||
<string name="susfs_config_setting_title">SuSFS 配置</string>
|
||||
<!-- 开机自启动相关 -->
|
||||
<string name="susfs_autostart_title">开机自启动</string>
|
||||
<string name="susfs_autostart_description">重启时自动应用所有非默认配置</string>
|
||||
<string name="susfs_autostart_requirement">需要添加配置后才能启用</string>
|
||||
<string name="susfs_autostart_enable_failed">启用开机自启动失败</string>
|
||||
<string name="susfs_autostart_disable_failed">禁用开机自启动失败</string>
|
||||
<string name="susfs_autostart_error">开机自启动配置错误: %s</string>
|
||||
<string name="susfs_no_config_to_autostart">没有可用的配置进行开机自启动</string>
|
||||
<!-- SuSFS Tab Titles -->
|
||||
<string name="susfs_tab_basic_settings">基本设置</string>
|
||||
<string name="susfs_tab_sus_paths">SuS 路径</string>
|
||||
<string name="susfs_tab_sus_mounts">SuS 挂载</string>
|
||||
<string name="susfs_tab_try_umount">尝试卸载</string>
|
||||
<string name="susfs_tab_path_settings">路径设置</string>
|
||||
<string name="susfs_tab_enabled_features">启用功能状态</string>
|
||||
<!-- SuSFS Path Management -->
|
||||
<string name="susfs_add_sus_path">添加 SuS 路径</string>
|
||||
<string name="susfs_add_sus_mount">添加 SuS 挂载</string>
|
||||
<string name="susfs_add_try_umount">添加尝试卸载</string>
|
||||
<string name="susfs_sus_path_added_success">SuS 路径添加成功</string>
|
||||
<string name="susfs_path_not_found_error">路径未找到错误</string>
|
||||
<string name="susfs_path_label">路径</string>
|
||||
<string name="susfs_mount_path_label">挂载路径</string>
|
||||
<string name="susfs_path_placeholder">例如: /system/addon.d</string>
|
||||
<string name="susfs_no_paths_configured">暂无 SuS 路径配置</string>
|
||||
<string name="susfs_no_mounts_configured">暂无 SuS 挂载配置</string>
|
||||
<string name="susfs_no_umounts_configured">暂无尝试卸载配置</string>
|
||||
<!-- SuSFS Umount Mode -->
|
||||
<string name="susfs_umount_mode_label">卸载模式</string>
|
||||
<string name="susfs_umount_mode_normal">普通卸载（0）</string>
|
||||
<string name="susfs_umount_mode_detach">分离卸载（1）</string>
|
||||
<string name="susfs_umount_mode_normal_short">普通</string>
|
||||
<string name="susfs_umount_mode_detach_short">分离</string>
|
||||
<string name="susfs_umount_mode_display">模式: %1$s (%2$s)</string>
|
||||
<string name="susfs_try_umount_added_success">尝试 umount 路径添加成功： %s</string>
|
||||
<string name="susfs_try_umount_added_saved">尝试 umount 路径保存成功： %s</string>
|
||||
<!-- SuSFS Run Umount -->
|
||||
<!-- SuSFS Reset Categories -->
|
||||
<string name="susfs_reset_paths_title">重置 SuS 路径</string>
|
||||
<string name="susfs_reset_paths_message">这将清除所有 SuS 路径配置，确定要继续吗？</string>
|
||||
<string name="susfs_reset_mounts_title">重置 SuS 挂载</string>
|
||||
<string name="susfs_reset_mounts_message">这将清除所有 SuS 挂载配置，确定要继续吗？</string>
|
||||
<string name="susfs_reset_umounts_title">重置尝试卸载</string>
|
||||
<string name="susfs_reset_umounts_message">这将清除所有尝试卸载配置，确定要继续吗？</string>
|
||||
<string name="susfs_reset_path_title">重置路径设置</string>
|
||||
<!-- SuSFS Path Settings -->
|
||||
<string name="susfs_android_data_path_label">Android Data 路径</string>
|
||||
<string name="susfs_sdcard_path_label">SDCard 路径</string>
|
||||
<string name="susfs_set_android_data_path">设置 Android Data 路径</string>
|
||||
<string name="susfs_set_sdcard_path">设置 SDCard 路径</string>
|
||||
<!-- SuSFS Enabled Features -->
|
||||
<string name="susfs_enabled_features_description">显示当前 SuSFS 启用的功能状态</string>
|
||||
<string name="susfs_no_features_found">未找到功能状态信息</string>
|
||||
<string name="susfs_feature_enabled">已启用</string>
|
||||
<string name="susfs_feature_disabled">已禁用</string>
|
||||
<!-- Feature Labels -->
|
||||
<string name="sus_path_feature_label">SuS 路径支持</string>
|
||||
<string name="sus_mount_feature_label">SuS 挂载支持</string>
|
||||
<string name="try_umount_feature_label">尝试卸载支持</string>
|
||||
<string name="spoof_uname_feature_label">欺骗 uname 支持</string>
|
||||
<string name="spoof_cmdline_feature_label">欺骗 Cmdline/Bootconfig</string>
|
||||
<string name="open_redirect_feature_label">开放重定向支持</string>
|
||||
<string name="enable_log_feature_label">日志记录支持</string>
|
||||
<string name="auto_default_mount_feature_label">自动默认挂载</string>
|
||||
<string name="auto_bind_mount_feature_label">自动绑定挂载</string>
|
||||
<string name="auto_try_umount_bind_feature_label">自动尝试卸载绑定挂载</string>
|
||||
<string name="hide_symbols_feature_label">隐藏 KSU SuSFS 符号</string>
|
||||
<string name="sus_kstat_feature_label">SuS Kstat 支持</string>
|
||||
<string name="sus_su_feature_label">SuS SU 模式切换功能</string>
|
||||
<!-- 可切换状态 -->
|
||||
<string name="susfs_feature_configurable">可配置的 SuSFS 功能</string>
|
||||
<string name="susfs_enable_log_label">SuSFS 启用日志</string>
|
||||
<string name="susfs_log_config_description">启用或者关闭 SuSFS 的日志</string>
|
||||
<string name="susfs_log_config_title">SuSFS 日志配置</string>
|
||||
<string name="susfs_log_enabled">启用 SuSFS 日志</string>
|
||||
<string name="susfs_log_disabled">关闭 SuSFS 日志</string>
|
||||
<string name="susfs_execution_location_label">执行位置</string>
|
||||
<string name="susfs_current_execution_location">当前执行位置：%s</string>
|
||||
<string name="susfs_execution_location_service">Service</string>
|
||||
<string name="susfs_execution_location_post_fs_data">Post-FS-Data</string>
|
||||
<string name="susfs_execution_location_service_description">在系统服务启动后执行</string>
|
||||
<string name="susfs_execution_location_post_fs_data_description">在文件系统挂载后但系统完全启动前执行,可能会导致循环重启</string>
|
||||
<string name="susfs_slot_info_title">槽位信息</string>
|
||||
<string name="susfs_slot_info_description">查看当前启动槽位信息并复制数值</string>
|
||||
<string name="susfs_current_active_slot">当前活动槽位：%s</string>
|
||||
<string name="susfs_slot_uname">Uname：%s</string>
|
||||
<string name="susfs_slot_build_time">构建时间：%s</string>
|
||||
<string name="susfs_slot_current_badge">当前</string>
|
||||
<string name="susfs_slot_use_uname">使用 Uname</string>
|
||||
<string name="susfs_slot_use_build_time">使用构建时间</string>
|
||||
<string name="susfs_slot_info_unavailable">无法获取槽位信息</string>
|
||||
<!-- SuSFS 自启动相关字符串 -->
|
||||
<string name="susfs_autostart_enabled_success">SuSFS 自启动模块已启用，模块路径：%s</string>
|
||||
<string name="susfs_autostart_disabled_success">SuSFS 自启动模块已禁用</string>
|
||||
<!-- SuSFS Kstat相关字符串 -->
|
||||
<string name="susfs_tab_kstat_config">Kstat 配置</string>
|
||||
<string name="kstat_static_config_added">Kstat 静态配置已添加：%1$s</string>
|
||||
<string name="kstat_config_removed">已移除 Kstat 配置：%1$s</string>
|
||||
<string name="kstat_path_added">Kstat 路径已添加：%1$s</string>
|
||||
<string name="kstat_path_removed">已移除 Kstat 路径：%1$s</string>
|
||||
<string name="kstat_updated">Kstat 已更新：%1$s</string>
|
||||
<string name="kstat_full_clone_updated">Kstat 完整克隆已更新：%1$s</string>
|
||||
<string name="add_kstat_statically_title">添加 Kstat 静态配置</string>
|
||||
<string name="file_or_directory_path_label">文件/目录路径</string>
|
||||
<string name="hint_use_default_value">提示：可以使用 "default" 来使用原始值</string>
|
||||
<string name="add_kstat_path_title">添加 Kstat 路径</string>
|
||||
<string name="add">添加</string>
|
||||
<string name="reset_kstat_config_title">重置 Kstat 配置</string>
|
||||
<string name="reset_kstat_config_message">确定要清除所有 Kstat 配置吗？此操作不可撤销</string>
|
||||
<string name="kstat_config_description_title">Kstat 配置说明</string>
|
||||
<string name="kstat_config_description_add_statically">• add_sus_kstat_statically: 静态配置文件/目录的 stat 信息</string>
|
||||
<string name="kstat_config_description_add">• add_sus_kstat: 在绑定挂载前添加路径，存储原始 stat 信息</string>
|
||||
<string name="kstat_config_description_update">• update_sus_kstat: 更新目标 ino，保持 size 和 blocks 不变</string>
|
||||
<string name="kstat_config_description_update_full_clone">• update_sus_kstat_full_clone: 仅更新 ino，其他保持原始值</string>
|
||||
<string name="static_kstat_config">静态 Kstat 配置</string>
|
||||
<string name="kstat_path_management">Kstat 路径管理</string>
|
||||
<string name="no_kstat_config_message">暂无 Kstat 配置，点击下方按钮添加配置</string>
|
||||
<!-- SuSFS Mount Hiding Control Related Strings -->
|
||||
<string name="susfs_hide_mounts_control_title">SuS 挂载隐藏控制</string>
|
||||
<string name="susfs_hide_mounts_control_description">控制 SuS 挂载对进程的隐藏行为</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_label">对所有进程隐藏 SuS 挂载</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_enabled_description">启用后，SuS 挂载将对所有进程隐藏，包括 KSU 进程</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_disabled_description">禁用后，SuS 挂载仅对非 KSU 进程隐藏，KSU 进程可以看到挂载</string>
|
||||
<string name="susfs_hide_mounts_all_enabled">已启用对所有进程隐藏 SuS 挂载</string>
|
||||
<string name="susfs_hide_mounts_all_disabled">已禁用对所有进程隐藏 SuS 挂载</string>
|
||||
<string name="susfs_hide_mounts_recommendation">建议在屏幕解锁后或在 service.sh 或 boot-completed.sh 阶段设置为禁用，这可以修复一些依赖 KSU 进程挂载的 root 应用的问题</string>
|
||||
<string name="susfs_hide_mounts_current_setting">当前设置: %s</string>
|
||||
<string name="susfs_hide_mounts_setting_all">对所有进程隐藏</string>
|
||||
<string name="susfs_hide_mounts_setting_non_ksu">仅对非 KSU 进程隐藏</string>
|
||||
<string name="susfs_android_data_path_set">Android Data 路径已设置为: %s</string>
|
||||
<string name="susfs_sdcard_path_set">SDCard 路径已设置为: %s</string>
|
||||
<string name="susfs_path_setup_warning">路径设置可能未完全成功，但将继续添加 SuS 路径</string>
|
||||
<!-- 备份和还原相关字符串 -->
|
||||
<string name="susfs_backup_title">备份</string>
|
||||
<string name="susfs_backup_description">创建所有 SuSFS 配置的备份。备份文件将包含所有设置、路径和配置信息。</string>
|
||||
<string name="susfs_backup_create">创建备份</string>
|
||||
<string name="susfs_backup_success">备份创建成功：%s</string>
|
||||
<string name="susfs_backup_failed">备份创建失败：%s</string>
|
||||
<string name="susfs_backup_file_not_found">备份文件未找到</string>
|
||||
<string name="susfs_backup_invalid_format">无效的备份文件格式</string>
|
||||
<string name="susfs_backup_version_mismatch">备份版本不匹配，但将尝试还原</string>
|
||||
<string name="susfs_restore_title">还原</string>
|
||||
<string name="susfs_restore_description">从备份文件还原 SuSFS 配置。这将覆盖所有当前设置。</string>
|
||||
<string name="susfs_restore_select_file">选择备份文件</string>
|
||||
<string name="susfs_restore_success" formatted="false">配置还原成功，备份创建于 %s，来自设备：%s</string>
|
||||
<string name="susfs_restore_failed">还原失败：%s</string>
|
||||
<string name="susfs_restore_confirm_title">确认还原</string>
|
||||
<string name="susfs_restore_confirm_description">这将覆盖所有当前的 SuSFS 配置。您确定要继续吗？</string>
|
||||
<string name="susfs_restore_confirm">还原</string>
|
||||
<string name="susfs_backup_info_date">备份日期：%s</string>
|
||||
<string name="susfs_backup_info_device">设备：%s</string>
|
||||
<string name="susfs_backup_info_version">版本：%s</string>
|
||||
<string name="hide_bl_script">上锁状态</string>
|
||||
<string name="hide_bl_script_description">覆盖引导锁状态属性于 late_start 服务模式</string>
|
||||
<string name="cleanup_residue">清理工具残留</string>
|
||||
<string name="cleanup_residue_description">清理各种模块以及工具的残留文件和目录（可能会误删导致丢失以及无法启动，谨慎使用）</string>
|
||||
<string name="susfs_edit_sus_path">编辑 SuS 路径</string>
|
||||
<string name="susfs_edit_sus_mount">编辑 SuS 挂载</string>
|
||||
<string name="susfs_edit_try_umount">编辑尝试卸载</string>
|
||||
<string name="edit_kstat_statically_title">编辑 Kstat 静态配置</string>
|
||||
<string name="edit_kstat_path_title">编辑 Kstat 路径</string>
|
||||
<string name="susfs_save">保存</string>
|
||||
<string name="edit">编辑</string>
|
||||
<string name="delete">删除</string>
|
||||
<string name="update">更新</string>
|
||||
<string name="kstat_config_updated">Kstat 配置更新</string>
|
||||
<string name="kstat_path_updated">Kstat 路径更新</string>
|
||||
<string name="susfs_update_full_clone">Susfs 完整克隆更新</string>
|
||||
<string name="umount_zygote_iso_service">卸载 Zygote 隔离服务</string>
|
||||
<string name="umount_zygote_iso_service_description">启用此选项将在系统启动时卸载 Zygote 隔离服务挂载点</string>
|
||||
<string name="umount_zygote_iso_service_enabled">Zygote 隔离服务卸载已启用</string>
|
||||
<string name="umount_zygote_iso_service_disabled">Zygote 隔离服务卸载已禁用</string>
|
||||
<string name="app_paths_section">应用路径</string>
|
||||
<string name="other_paths_section">其他路径</string>
|
||||
<string name="add_custom_path">其他</string>
|
||||
<string name="add_app_path">应用</string>
|
||||
<string name="susfs_add_app_path">添加应用路径</string>
|
||||
<string name="susfs_version_mismatch">SuSFS 库版本不匹配，内核：%1$s vs 管理器：%2$s，建议更新内核或管理器</string>
|
||||
<string name="warning">警告</string>
|
||||
<string name="search_apps">搜索应用</string>
|
||||
<string name="selected_apps_count">%1$d 个已选应用</string>
|
||||
<string name="already_added_apps_count">%1$d 个已添加应用</string>
|
||||
<string name="all_apps_already_added">所有应用均已添加</string>
|
||||
<string name="no_apps_found">未找到应用</string>
|
||||
<!-- 循环路径相关 -->
|
||||
<string name="susfs_tab_sus_loop_paths">SuS 循环路径</string>
|
||||
<string name="susfs_add_sus_loop_path">添加 SuS 循环路径</string>
|
||||
<string name="susfs_edit_sus_loop_path">编辑 SuS 循环路径</string>
|
||||
<string name="susfs_loop_path_added_success">SuS 循环路径添加成功: %1$s</string>
|
||||
<string name="susfs_loop_path_removed">SuS 循环路径已移除: %1$s</string>
|
||||
<string name="susfs_loop_path_updated">SuS 循环路径已更新: %1$s -> %2$s</string>
|
||||
<string name="susfs_no_loop_paths_configured">未配置 SuS 循环路径</string>
|
||||
<string name="susfs_reset_loop_paths_title">重置循环路径</string>
|
||||
<string name="susfs_reset_loop_paths_message">确定要清空所有 SuS 循环路径吗？此操作无法撤销。</string>
|
||||
<string name="susfs_loop_path_label">循环路径</string>
|
||||
<string name="susfs_loop_path_placeholder">/data/example/path</string>
|
||||
<string name="susfs_loop_path_restriction_warning">注意：只有不在 /storage/ 和 /sdcard/ 内的路径才能通过循环路径添加。</string>
|
||||
<string name="susfs_loop_path_invalid_location">错误：循环路径不能位于 /storage/ 或 /sdcard/ 目录内</string>
|
||||
<string name="loop_paths_section">循环路径</string>
|
||||
<string name="add_loop_path">添加循环路径</string>
|
||||
<!-- 循环路径功能描述 -->
|
||||
<string name="sus_loop_paths_description_title">循环路径配置</string>
|
||||
<string name="sus_loop_paths_description_text">循环路径会在每次非 root 用户应用或隔离服务启动时重新标记为 SUS_PATH。这有助于解决添加的路径可能因 inode 状态重置或内核中 inode 重新创建而失效的问题</string>
|
||||
<string name="avc_log_spoofing">AVC 日志欺骗</string>
|
||||
<string name="avc_log_spoofing_enabled">AVC 日志欺骗已启用</string>
|
||||
<string name="avc_log_spoofing_disabled">AVC 日志欺骗已禁用</string>
|
||||
<string name="avc_log_spoofing_description">禁用: 禁用在内核 AVC 日志中欺骗 \'su\' 的 sus tcontext。\n启用: 启用在内核 AVC 日志中将 \'su\' 的 sus tcontext 欺骗为 \'kernel\'</string>
|
||||
<string name="avc_log_spoofing_warning">重要提示：\n- 内核中默认设置为 \'0\'\n- 启用此功能有时会使开发人员在调试权限或 SELinux 问题时难以识别原因，因此建议用户在调试时禁用此功能。</string>
|
||||
<!-- SUS Map related strings -->
|
||||
<string name="susfs_tab_sus_maps">SUS映射</string>
|
||||
<string name="susfs_sus_map_label">库文件路径</string>
|
||||
<string name="susfs_sus_map_placeholder">/data/adb/modules/my_module/zygisk/arm64-v8a.so</string>
|
||||
<string name="susfs_add_sus_map">添加SUS映射</string>
|
||||
<string name="susfs_edit_sus_map">编辑SUS映射</string>
|
||||
<string name="susfs_sus_map_added_success">SUS映射添加成功: %1$s</string>
|
||||
<string name="susfs_sus_map_removed">SUS映射已移除: %1$s</string>
|
||||
<string name="susfs_sus_map_updated">SUS映射已更新: %1$s -> %2$s</string>
|
||||
<string name="susfs_no_sus_maps_configured">未配置SUS映射</string>
|
||||
<string name="susfs_reset_sus_maps_title">重置SUS映射</string>
|
||||
<string name="susfs_reset_sus_maps_message">这将移除所有已配置的SUS映射。此操作无法撤销。</string>
|
||||
<string name="sus_maps_section">内存映射隐藏</string>
|
||||
<string name="sus_maps_description_title">隐藏/proc/self/中各种映射中的mmap真实文件</string>
|
||||
<string name="sus_maps_description_text">从 /proc/self/[maps|smaps|smaps_rollup|map_files|mem|pagemap] 中隐藏内存映射的真实文件路径。请注意：此功能不支持隐藏匿名内存映射，也无法隐藏由注入库本身产生的内联钩子或 PLT 钩子。</string>
|
||||
<string name="sus_maps_warning">重要提示：对于具备完善注入检测机制的应用，此功能可能无法有效绕过检测。</string>
|
||||
<string name="sus_maps_debug_info">首先通过 ps -enf 查找目标应用的 PID 和 UID，然后检查 /proc/<pid>/maps 中的相关路径，并与 /proc/1/mountinfo 中的设备号进行比对以确保一致性。只有当设备号一致时，隐藏映射才能正常工作。</string>
|
||||
</resources>
|
||||
|
||||
@@ -365,4 +365,250 @@
|
||||
<!-- Zip Install Prompts -->
|
||||
<string name="kernel_install_prompt_with_name">The following kernels will be installed: %1$s</string>
|
||||
<string name="mixed_install_prompt_with_name">The following files will be installed: %1$s</string>
|
||||
<!-- SuSFS Configuration -->
|
||||
<string name="susfs_config_title">SuSFS Configuration</string>
|
||||
<string name="susfs_config_summary">Configure SuSFS module settings</string>
|
||||
<string name="susfs_config_description">Configuration Description</string>
|
||||
<string name="susfs_config_description_text">This feature allows you to customize the SuSFS uname value and build time spoofing. Enter the values you want to set and click Apply to take effect</string>
|
||||
<string name="susfs_uname_label">Uname Value</string>
|
||||
<string name="susfs_uname_placeholder">Please enter custom uname value</string>
|
||||
<string name="susfs_build_time_label">Build Time Spoofing</string>
|
||||
<string name="susfs_build_time_placeholder">Please enter build time spoofing value</string>
|
||||
<string name="susfs_current_value">Current value: %s</string>
|
||||
<string name="susfs_current_build_time">Current build time: %s</string>
|
||||
<string name="susfs_reset_to_default">Reset to Default</string>
|
||||
<string name="susfs_apply">Apply</string>
|
||||
<!-- SuSFS Reset Confirmation -->
|
||||
<string name="susfs_reset_confirm_title">Confirm Reset</string>
|
||||
<!-- SuSFS Toast Messages -->
|
||||
<string name="susfs_binary_not_found">Cannot find ksu_susfs file</string>
|
||||
<string name="susfs_command_failed">SuSFS command execution failed</string>
|
||||
<string name="susfs_command_error">Error executing SuSFS command: %s</string>
|
||||
<string name="susfs_uname_set_success" formatted="false">SuSFS uname and build time set successfully: %s, %s</string>
|
||||
<!-- SuSFS Settings Item -->
|
||||
<string name="susfs_config_setting_title">SuSFS Configuration</string>
|
||||
<!-- 开机自启动相关 -->
|
||||
<string name="susfs_autostart_title">Auto Start</string>
|
||||
<string name="susfs_autostart_description">Automatically apply all non-default configurations on reboot</string>
|
||||
<string name="susfs_autostart_requirement">Configuration needs to be added to enable</string>
|
||||
<string name="susfs_autostart_enable_failed">Failed to enable auto start</string>
|
||||
<string name="susfs_autostart_disable_failed">Failed to disable auto start</string>
|
||||
<string name="susfs_autostart_error">Auto start configuration error: %s</string>
|
||||
<string name="susfs_no_config_to_autostart">No available configuration for auto start</string>
|
||||
<!-- SuSFS Tab Titles -->
|
||||
<string name="susfs_tab_basic_settings">Basic Settings</string>
|
||||
<string name="susfs_tab_sus_paths">SUS Paths</string>
|
||||
<string name="susfs_tab_sus_mounts">SUS Mounts</string>
|
||||
<string name="susfs_tab_try_umount">Try Umount</string>
|
||||
<string name="susfs_tab_path_settings">Path Settings</string>
|
||||
<string name="susfs_tab_enabled_features">Enabled Features Status</string>
|
||||
<!-- SuSFS Path Management -->
|
||||
<string name="susfs_add_sus_path">Add SUS Path</string>
|
||||
<string name="susfs_add_sus_mount">Add SUS Mount</string>
|
||||
<string name="susfs_add_try_umount">Add Try Umount</string>
|
||||
<string name="susfs_sus_path_added_success">SUS path added successfully</string>
|
||||
<string name="susfs_path_not_found_error">Path not found error</string>
|
||||
<string name="susfs_path_label">Path</string>
|
||||
<string name="susfs_mount_path_label">Mount Path</string>
|
||||
<string name="susfs_path_placeholder">e.g.: /system/addon.d</string>
|
||||
<string name="susfs_no_paths_configured">No SUS paths configured</string>
|
||||
<string name="susfs_no_mounts_configured">No SUS mounts configured</string>
|
||||
<string name="susfs_no_umounts_configured">No try umount configured</string>
|
||||
<!-- SuSFS Umount Mode -->
|
||||
<string name="susfs_umount_mode_label">Umount Mode</string>
|
||||
<string name="susfs_umount_mode_normal">Normal Umount (0)</string>
|
||||
<string name="susfs_umount_mode_detach">Detach Umount (1)</string>
|
||||
<string name="susfs_umount_mode_normal_short">Normal</string>
|
||||
<string name="susfs_umount_mode_detach_short">Detach</string>
|
||||
<string name="susfs_umount_mode_display">Mode: %1$s (%2$s)</string>
|
||||
<string name="susfs_try_umount_added_success">Try to umount path added successfully： %s</string>
|
||||
<string name="susfs_try_umount_added_saved">Attempted umount path save succeeded： %s</string>
|
||||
<!-- SuSFS Reset Categories -->
|
||||
<string name="susfs_reset_paths_title">Reset SUS Paths</string>
|
||||
<string name="susfs_reset_paths_message">This will clear all SUS path configurations. Are you sure you want to continue?</string>
|
||||
<string name="susfs_reset_mounts_title">Reset SUS Mounts</string>
|
||||
<string name="susfs_reset_mounts_message">This will clear all SUS mount configurations. Are you sure you want to continue?</string>
|
||||
<string name="susfs_reset_umounts_title">Reset Try Umount</string>
|
||||
<string name="susfs_reset_umounts_message">This will clear all try umount configurations. Are you sure you want to continue?</string>
|
||||
<string name="susfs_reset_path_title">Reset Path Settings</string>
|
||||
<!-- SuSFS Path Settings -->
|
||||
<string name="susfs_android_data_path_label">Android Data Path</string>
|
||||
<string name="susfs_sdcard_path_label">SD Card Path</string>
|
||||
<string name="susfs_set_android_data_path">Set Android Data Path</string>
|
||||
<string name="susfs_set_sdcard_path">Set SD Card Path</string>
|
||||
<!-- SuSFS Enabled Features -->
|
||||
<string name="susfs_enabled_features_description">Display current SuSFS enabled features status</string>
|
||||
<string name="susfs_no_features_found">No feature status information found</string>
|
||||
<string name="susfs_feature_enabled">Enabled</string>
|
||||
<string name="susfs_feature_disabled">Disabled</string>
|
||||
<!-- Feature Labels -->
|
||||
<string name="sus_path_feature_label">SUS Path Support</string>
|
||||
<string name="sus_mount_feature_label">SUS Mount Support</string>
|
||||
<string name="try_umount_feature_label">Try Umount Support</string>
|
||||
<string name="spoof_uname_feature_label">Spoof uname Support</string>
|
||||
<string name="spoof_cmdline_feature_label">Spoof Cmdline/Bootconfig</string>
|
||||
<string name="open_redirect_feature_label">Open Redirect Support</string>
|
||||
<string name="enable_log_feature_label">Logging Support</string>
|
||||
<string name="auto_default_mount_feature_label">Auto Default Mount</string>
|
||||
<string name="auto_bind_mount_feature_label">Auto Bind Mount</string>
|
||||
<string name="auto_try_umount_bind_feature_label">Auto Try Umount Bind Mount</string>
|
||||
<string name="hide_symbols_feature_label">Hide KSU SUSFS Symbols</string>
|
||||
<string name="sus_kstat_feature_label">SUS Kstat Support</string>
|
||||
<string name="sus_su_feature_label">SUS SU mode switching function</string>
|
||||
<!-- 可切换状态 -->
|
||||
<string name="susfs_feature_configurable">Configurable SuSFS Features</string>
|
||||
<string name="susfs_enable_log_label">SuSFS Enable Log</string>
|
||||
<string name="susfs_log_config_description">Enable or disable logging for SuSFS</string>
|
||||
<string name="susfs_log_config_title">SuSFS Logging Configuration</string>
|
||||
<string name="susfs_log_enabled">Enabling SuSFS Logging</string>
|
||||
<string name="susfs_log_disabled">Turn off SuSFS logging</string>
|
||||
<string name="susfs_execution_location_label">Execution Location</string>
|
||||
<string name="susfs_current_execution_location">Current execution location: %s</string>
|
||||
<string name="susfs_execution_location_service">Service</string>
|
||||
<string name="susfs_execution_location_post_fs_data">Post-FS-Data</string>
|
||||
<string name="susfs_execution_location_service_description">Execute after system services start</string>
|
||||
<string name="susfs_execution_location_post_fs_data_description">Execute after file system is mounted but before system is fully booted，May cause a boot loop</string>
|
||||
<string name="susfs_slot_info_title">Slot Information</string>
|
||||
<string name="susfs_slot_info_description">View current boot slot information and copy values</string>
|
||||
<string name="susfs_current_active_slot">Current Active Slot: %s</string>
|
||||
<string name="susfs_slot_uname">Uname: %s</string>
|
||||
<string name="susfs_slot_build_time">Build Time: %s</string>
|
||||
<string name="susfs_slot_current_badge">Current</string>
|
||||
<string name="susfs_slot_use_uname">Use Uname</string>
|
||||
<string name="susfs_slot_use_build_time">Use Build Time</string>
|
||||
<string name="susfs_slot_info_unavailable">Unable to retrieve slot information</string>
|
||||
<!-- SuSFS 自启动相关字符串 -->
|
||||
<string name="susfs_autostart_enabled_success">SuSFS auto-start module enabled, module path: %s</string>
|
||||
<string name="susfs_autostart_disabled_success">SuSFS auto-start module disabled</string>
|
||||
<!-- SuSFS Kstat相关字符串 -->
|
||||
<string name="susfs_tab_kstat_config">Kstat Configuration</string>
|
||||
<string name="kstat_static_config_added">Kstat static configuration added: %1$s</string>
|
||||
<string name="kstat_config_removed">Kstat configuration removed: %1$s</string>
|
||||
<string name="kstat_path_added">Kstat path added: %1$s</string>
|
||||
<string name="kstat_path_removed">Kstat path removed: %1$s</string>
|
||||
<string name="kstat_updated">Kstat updated: %1$s</string>
|
||||
<string name="kstat_full_clone_updated">Kstat full clone updated: %1$s</string>
|
||||
<string name="add_kstat_statically_title">Add Kstat Static Configuration</string>
|
||||
<string name="file_or_directory_path_label">File/Directory Path</string>
|
||||
<string name="hint_use_default_value">Hint: You can use "default" to use the original value</string>
|
||||
<string name="add_kstat_path_title">Add Kstat Path</string>
|
||||
<string name="add">Add</string>
|
||||
<string name="reset_kstat_config_title">Reset Kstat Configuration</string>
|
||||
<string name="reset_kstat_config_message">Are you sure you want to clear all Kstat configurations? This action cannot be undone</string>
|
||||
<string name="kstat_config_description_title">Kstat Configuration Description</string>
|
||||
<string name="kstat_config_description_add_statically">• add_sus_kstat_statically: Static stat info of files/directories</string>
|
||||
<string name="kstat_config_description_add">• add_sus_kstat: Add path before bind mount, storing original stat info</string>
|
||||
<string name="kstat_config_description_update">• update_sus_kstat: Update target ino, keep size and blocks unchanged</string>
|
||||
<string name="kstat_config_description_update_full_clone">• update_sus_kstat_full_clone: Update ino only, keep other original values</string>
|
||||
<string name="static_kstat_config">Static Kstat Configuration</string>
|
||||
<string name="kstat_path_management">Kstat Path Management</string>
|
||||
<string name="no_kstat_config_message">No Kstat configuration yet, click the button below to add</string>
|
||||
<!-- SuSFS Mount Hiding Control Related Strings -->
|
||||
<string name="susfs_hide_mounts_control_title">SUS Mount Hiding Control</string>
|
||||
<string name="susfs_hide_mounts_control_description">Control the hiding behavior of SUS mounts for processes</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_label">Hide SUS mounts for all processes</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_enabled_description">When enabled, SUS mounts will be hidden from all processes, including KSU processes</string>
|
||||
<string name="susfs_hide_mounts_for_all_procs_disabled_description">When disabled, SUS mounts will only be hidden from non-KSU processes, KSU processes can see the mounts</string>
|
||||
<string name="susfs_hide_mounts_all_enabled">Enabled hiding SUS mounts for all processes</string>
|
||||
<string name="susfs_hide_mounts_all_disabled">Disabled hiding SUS mounts for all processes</string>
|
||||
<string name="susfs_hide_mounts_recommendation">It is recommended to set to disabled after screen is unlocked, or during service.sh or boot-completed.sh stage, as this should fix the issue on some rooted apps that rely on mounts mounted by KSU process</string>
|
||||
<string name="susfs_hide_mounts_current_setting">Current setting: %s</string>
|
||||
<string name="susfs_hide_mounts_setting_all">Hide for all processes</string>
|
||||
<string name="susfs_hide_mounts_setting_non_ksu">Hide only for non-KSU processes</string>
|
||||
<string name="susfs_android_data_path_set">Android Data path has been set to: %s</string>
|
||||
<string name="susfs_sdcard_path_set">SD card path has been set to: %s</string>
|
||||
<string name="susfs_path_setup_warning">Path setup may not be fully successful, but SUS paths will continue to be added</string>
|
||||
<!-- 备份和还原相关字符串 -->
|
||||
<string name="susfs_backup_title">Backup</string>
|
||||
<string name="susfs_backup_description">Create a backup of all SuSFS configurations. The backup file will include all settings, paths, and configurations</string>
|
||||
<string name="susfs_backup_create">Create Backup</string>
|
||||
<string name="susfs_backup_success">Backup created successfully: %s</string>
|
||||
<string name="susfs_backup_failed">Backup creation failed: %s</string>
|
||||
<string name="susfs_backup_file_not_found">Backup file not found</string>
|
||||
<string name="susfs_backup_invalid_format">Invalid backup file format</string>
|
||||
<string name="susfs_backup_version_mismatch">Backup version mismatch, but will attempt to restore</string>
|
||||
<string name="susfs_restore_title">Restore</string>
|
||||
<string name="susfs_restore_description">Restore SuSFS configurations from a backup file. This will overwrite all current settings</string>
|
||||
<string name="susfs_restore_select_file">Select Backup File</string>
|
||||
<string name="susfs_restore_success" formatted="false">Configuration restored successfully from backup created on %s from device: %s</string>
|
||||
<string name="susfs_restore_failed">Restore failed: %s</string>
|
||||
<string name="susfs_restore_confirm_title">Confirm Restore</string>
|
||||
<string name="susfs_restore_confirm_description">This will overwrite all current SuSFS configurations. Are you sure you want to continue?</string>
|
||||
<string name="susfs_restore_confirm">Restore</string>
|
||||
<string name="susfs_backup_info_date">Backup Date: %s</string>
|
||||
<string name="susfs_backup_info_device">Device: %s</string>
|
||||
<string name="susfs_backup_info_version">Version: %s</string>
|
||||
<string name="hide_bl_script">Lock state</string>
|
||||
<string name="hide_bl_script_description">Overwrite bootloader locking status attribute in late_start service mode</string>
|
||||
<string name="cleanup_residue">Cleanup Residue</string>
|
||||
<string name="cleanup_residue_description">Clean up the residual files and directories of various modules and tools (May be deleted by mistake, resulting in loss and failure to start, use with caution)</string>
|
||||
<string name="susfs_edit_sus_path">Edit SUS Path</string>
|
||||
<string name="susfs_edit_sus_mount">Edit SUS Mount</string>
|
||||
<string name="susfs_edit_try_umount">Edit Try Umount</string>
|
||||
<string name="edit_kstat_statically_title">Edit Kstat Static Configuration</string>
|
||||
<string name="edit_kstat_path_title">Edit Kstat Path</string>
|
||||
<string name="susfs_save">Save</string>
|
||||
<string name="edit">Edit</string>
|
||||
<string name="delete">Delete</string>
|
||||
<string name="update">Update</string>
|
||||
<string name="kstat_config_updated">Kstat config update</string>
|
||||
<string name="kstat_path_updated">Kstat path update</string>
|
||||
<string name="susfs_update_full_clone">Susfs update full clone</string>
|
||||
<string name="umount_zygote_iso_service">Unmount Zygote Isolation Service</string>
|
||||
<string name="umount_zygote_iso_service_description">Enable this option to unmount Zygote isolation service mount points at system startup</string>
|
||||
<string name="umount_zygote_iso_service_enabled">Zygote isolation service unmount enabled</string>
|
||||
<string name="umount_zygote_iso_service_disabled">Zygote isolation service unmount disabled</string>
|
||||
<string name="app_paths_section">Application Path</string>
|
||||
<string name="other_paths_section">Other paths</string>
|
||||
<string name="add_custom_path">Other</string>
|
||||
<string name="add_app_path">App</string>
|
||||
<string name="susfs_add_app_path">Add App Path</string>
|
||||
<string name="susfs_version_mismatch">SuSFS library version mismatch, kernel: %1$s vs manager: %2$s, It is recommended to update the kernel or manager</string>
|
||||
<string name="warning">Warning</string>
|
||||
<string name="search_apps">Search Apps</string>
|
||||
<string name="selected_apps_count">%1$d apps selected</string>
|
||||
<string name="already_added_apps_count">%1$d apps already added</string>
|
||||
<string name="all_apps_already_added">All apps have been added</string>
|
||||
<string name="no_apps_found">No apps found</string>
|
||||
<!-- 循环路径相关 -->
|
||||
<string name="susfs_tab_sus_loop_paths">SUS Loop Paths</string>
|
||||
<string name="susfs_add_sus_loop_path">Add SUS Loop Path</string>
|
||||
<string name="susfs_edit_sus_loop_path">Edit SUS Loop Path</string>
|
||||
<string name="susfs_loop_path_added_success">SUS loop path added successfully: %1$s</string>
|
||||
<string name="susfs_loop_path_removed">SUS loop path removed: %1$s</string>
|
||||
<string name="susfs_loop_path_updated">SUS loop path updated: %1$s -> %2$s</string>
|
||||
<string name="susfs_no_loop_paths_configured">No SUS loop paths configured</string>
|
||||
<string name="susfs_reset_loop_paths_title">Reset Loop Paths</string>
|
||||
<string name="susfs_reset_loop_paths_message">Are you sure you want to clear all SUS loop paths? This action cannot be undone</string>
|
||||
<string name="susfs_loop_path_label">Loop Path</string>
|
||||
<string name="susfs_loop_path_placeholder">/data/example/path</string>
|
||||
<string name="susfs_loop_path_restriction_warning">Note: Only paths NOT inside /storage/ and /sdcard/ can be added via loop paths</string>
|
||||
<string name="susfs_loop_path_invalid_location">Error: Loop paths cannot be inside /storage/ or /sdcard/ directories</string>
|
||||
<string name="loop_paths_section">Loop Paths</string>
|
||||
<string name="add_loop_path">Add Loop Path</string>
|
||||
<!-- 循环路径功能描述 -->
|
||||
<string name="sus_loop_paths_description_title">Loop Path Configuration</string>
|
||||
<string name="sus_loop_paths_description_text">Loop paths are re-flagged as SUS_PATH on each non-root user app or isolated service startup. This helps address issues where added paths may have their inode status reset or inode re-created in the kernel</string>
|
||||
<string name="avc_log_spoofing">AVC Log Spoofing</string>
|
||||
<string name="avc_log_spoofing_enabled">AVC log spoofing has been enabled</string>
|
||||
<string name="avc_log_spoofing_disabled">AVC log spoofing has been disabled</string>
|
||||
<string name="avc_log_spoofing_description">Disabled: Disable spoofing the sus tcontext of \'su\' shown in avc log in kernel\nEnabled: Enable spoofing the sus tcontext of \'su\' with \'kernel\' shown in avc log in kernel</string>
|
||||
<string name="avc_log_spoofing_warning">Important Note:\n- It is set to \'0\' by default in kernel\n- Enabling this will sometimes make developers hard to identify the cause when they are debugging with some permission or SELinux issue, so users are advised to disable this when doing</string>
|
||||
<!-- SUS Map related strings -->
|
||||
<string name="susfs_tab_sus_maps">SUS Maps</string>
|
||||
<string name="susfs_sus_map_label">Library Path</string>
|
||||
<string name="susfs_sus_map_placeholder">/data/adb/modules/my_module/zygisk/arm64-v8a.so</string>
|
||||
<string name="susfs_add_sus_map">Add SUS Map</string>
|
||||
<string name="susfs_edit_sus_map">Edit SUS Map</string>
|
||||
<string name="susfs_sus_map_added_success">SUS map added successfully: %1$s</string>
|
||||
<string name="susfs_sus_map_removed">SUS map removed: %1$s</string>
|
||||
<string name="susfs_sus_map_updated">SUS map updated: %1$s -> %2$s</string>
|
||||
<string name="susfs_no_sus_maps_configured">No SUS maps configured</string>
|
||||
<string name="susfs_reset_sus_maps_title">Reset SUS Maps</string>
|
||||
<string name="susfs_reset_sus_maps_message">This will remove all configured SUS maps. This action cannot be undone.</string>
|
||||
<string name="sus_maps_section">Memory Map Hiding</string>
|
||||
<string name="sus_maps_description_title">Hide the mmapped real file from various maps in /proc/self/</string>
|
||||
<string name="sus_maps_description_text">Hide the real file paths of memory mappings from /proc/self/[maps|smaps|smaps_rollup|map_files|mem|pagemap]. Please note: This feature does not support hiding anonymous memory mappings, nor can it hide inline hooks or PLT hooks caused by the injected library itself.</string>
|
||||
<string name="sus_maps_warning">Important Notice: For applications with well-implemented injection detection mechanisms, this feature may not effectively bypass detection.</string>
|
||||
<string name="sus_maps_debug_info">First, find the target application\'s PID and UID using ps -enf, then check the relevant paths in /proc/<pid>/maps and compare the device numbers with those in /proc/1/mountinfo to ensure consistency. Only when the device numbers match can the map hiding function work properly.</string>
|
||||
</resources>
|
||||
|
||||
Reference in New Issue
Block a user